Cloud dispersion models

A new technique has been developed to compute mean and fluctuating concentrations in complex turbulent flows. An initial distribution of material is discretised into any small clouds which are advected by a combination of the mean flow and large scale turbulence. The turbulence can be simulated either by Kinematic Simulation or by a stochastic model for the motion of each cloud centroid. The clouds also diffuse relative to their centroids; the statistics for this are obtained from a separate calculation of the growth of individual clouds in small scale turbulence, generated by Kinematic Simulation. The ensemble of discrete clouds is periodically rediscretised, to limit the size of the small clouds and prevent overlapping. The model is illustrated with simulations of dispersion in uniform flow and in a coastal flow, and the results are compared with analytic, steady state solutions where available.     

Cavitated bifurcation for composed compressible hyper-elastic materials

The cavitated bifurcation problem in a solid sphere composed of two compressible hyper-elastic materials is examined. The bifurcation solution for the composed sphere under a uniform radial tensile boundary dead-load is obtained. The bifurcation curves and the stress contributions subsequent to the cavitation are given. The right and left bifurcation as well as the catastrophe and concentration of stresses are analyzed. The stability of solutions is discussed through an energy comparison. Project supported by the National Natural Science Foundation of China (No. 19802012).     

平面ISODYNE法及其在复合材料力学中的应用

由J. T. Pindera提出的平面isodyne法是散光法的一种发展。具有非破坏性直接测取受力物体内部应力的特点。不需要大功率的激光器,条纹清晰,无畸变,对于平面应力问题可以得到应力分量的全部信息。在复合材料力学、断裂力学和接触问题等领域有广泛的应用前景。文章闸述了该方法的原理和技术,并应用它得到一受三点弯曲荷载的有裂纹的复合材料梁粘结层的应力分布。     

A physical decomposition of the stress tensor for complex flows

Traditionally, the components of the stress with respect to a relevant coordinate system are used for the purpose of stress visualisation and interpretation. A case for using a flow dependent measure to interpret and visualise stress is made for two dimensional flow, together with a suggestion for extending the idea to three dimensions. The method is illustrated for Newtonian and Oldroyd B fluids in both the eccentrically rotating cylinder and flow past a cylinder benchmark problems. In the context of a generalised Newtonian fluid, the relation between the flow-dependent stress measure to other field variables under certain flow conditions, is examined and is indicative of its importance in complex flow.

Optimal lower bounds on the hydrostatic stress amplification inside random two-phase elastic composites

Composites made from two linear isotropic elastic materials are subjected to a uniform hydrostatic stress. It is assumed that only the volume fraction of each elastic material is known. Lower bounds on all rth moments of the hydrostatic stress field inside each phase are obtained for r?2. A lower bound on the maximum value of the hydrostatic stress field is also obtained. These bounds are given by explicit formulas depending on the volume fractions of the constituent materials and their elastic moduli. All of these bounds are shown to be the best possible as they are attained by the hydrostatic stress field inside the Hashin-Shtrikman coated sphere assemblage. The bounds provide a new opportunity for the assessment of load transfer between macroscopic and microscopic scales for statistically defined microstructures.     

Mixed-mode I/II fields around a crack with a cohesive zone ahead of the crack tip

Considering a cohesive zone ahead of the crack tip, the linear elastic crack problem under Mode I, Mode II or mixed-mode conditions is formulated in an elliptic coordinate system, so that the cohesive surfaces are conveniently represented by straight line segments. It is shown that the displacement and stress fields around the crack tip and the cohesive zone, expressed in terms of elliptic coordinates, have a simple mathematical form, which does not contain a stress singularity at the crack tip due to the existence of the cohesive zone.     

In search of physical parameters influenced by flow patterns in a heterogeneous two-phase mixture in microchannels using concomitant measurements

Space transportation systems require high-performance thermal protection and fluid management for systems ranging from cryogenic fluid devices to primary structures, and for propulsion systems exposed to extremely high temperatures, and other space systems, e.g., integrated circuits and cooling/environment control devices for advanced space suits. Although considerable developmental effort is underway to bring promising technologies to a readiness level for practical use, new and innovative methods are still needed. One such method is the Advanced Micro Cooling Module (AMCM), essentially a compact two-phase heat exchanger constructed of microchannels and designed to rapidly remove large quantities of heat from critical systems by incorporating phase transition. This paper describes the results of experimental research in two-phase flow phenomena, encompassing both an experimental and an analytical approach to the incorporation of flow patterns for air–water mixtures flowing in microchannels. Specifically addressed are: (1) design and construction of a sensitive two-phase experimental system which measures both ac and dc components of in situ physical mixture parameters including spatial concentration, using concomitant methods; (2) data acquisition and analysis in the amplitude, time, and frequency domains; and (3) analysis of results including evaluation of in situ physical parameters, and assessment of their validity for application in flow pattern determination.     

Studies on the Effect of Organic Solvents and Temperature on the Micellar Solution of Pentamethylene-1,5-bis(tetradecyldimethylammonium bromide) Gemini Surfactant

Effects of three organic solvents, viz. methyl cellosolve, acetonitrile, and formamide, on the micellization process of Gemini surfactant pentamethylene-1,5-bis(tetradecyldimethylammonium bromide) aqueous solutions, with the volume percentages of the organic solvents up to 50%, have been investigated conductometrically. The studies were made at different temperatures and the data were used to find out different micellization parameters. From the study, it was observed that, although an increment in the amount of the organic solvents delays the micellization, the increase in the critical micelle concentration (cmc) is comparatively less below 20%(v/v) showing the predominance of water character in the bulk phase at lower compositions of the organic solvents. Applying equilibrium model for micelle formation, various thermodynamic parameters were also calculated from the temperature dependence of the cmc values and the results show that the micellization process becomes less spontaneous as the volume % of the organic solvent increases in the system due to the action of water-organic solvent mixed media as better solvent than pure water (solvophobic effect) for the studied Gemini molecules.     

MULTIPLE EMULSIONS STABILIZED BY COLLOIDAL MICROGRYSTALLINE CELLULOSE

Multiple emulsions stabilized by colloidal microcrystalline cellulose (CMCC, Avicel RC591) at the w/o and o/w interfaces, and by the addition of Span 80 or Span 85 at the w/o interface, were studied by means of brightfield microscopy, freeze-etch electron microscopy, droplet size distribution analysis and rheologic measurements. Stable multiple emulsions were prepared by incorporation of sodium chloride in the innermost aqueous phase, thereby creating an osmotic gradient preventing loss of the inner aqueous phase to the external aqueous phase. Freeze-etch electron microscopy of the multiple emulsions indicated the presence of a network of microcrystalline cellulose at the outer o/w interface. It may be assumed that the surfactant directly stabilized the w/o interface by adsorption at the interface, as well as indirectly by facilitating wetting of the microcrystalline cellulose by the oil. From rheologic measurements, the existence of a three-dimensional network in the external aqueous phase was indicated by the considerable degrees of thlxotropy and significant static yield values of these multiple emulsions.     

Synthesis and Characterization of Silicone Modified Polyurethane Surfactant Useable at High Temperature

A series of novel silicone modified polyurethane (Si-PU) surfactants were successfully synthesized by using hydroxypropyl-terminated polydimethylsiloxane (HPMS), polyethylene glycol (PEG), dimethylolpropionic acid (DMPA) and isophoronediisocyanate (IPDI). The chemical structure of the surfactant was confirmed by FTIR and ¹H-NMR. TEM photographs showed that the micelles of the Si-PU surfactants dispersed in aqueous solution were spherical with the particle size in the range of 100–400 nm. Surface tension measurements indicated that these surfactants had low surface tension to 29.9 mN·m^?1and a definite critical micelle concentration to, approximately 5.0×10^?4–7.5×10^?4mol·L^?1. When the content of HPMS was 20 wt%, the surfactant's, emulsifying performance was superior to the traditionally available Span80/Tween80 mixed emulsifiers. In addition to that, no phase transition temperature was detected from 20°C to 90°C by fluorescence probe and DSC measurements, confirming the high thermal stability of the micelles.